ESG Secure™ Laminated Security Glazing


Our reputation as one of the UK’s leading manufacturers of security glass products is something we hold with great pride and take very seriously.

For the past decade we have constantly been at the forefront of product development and in fact we the first company in the UK to create a security glass that achieved LPS1270 certification. Working closely with members of the police and security sectors, as well as insurers and the UK’s main certification boards, to continually update our products to best suit the needs of the industry. Our range of security glass covers the entire spectrum of required levels of security; from EN356 manual attack resistant glass commonly used in applications such as shop fronts and jewellery counters through to ISO 16933:2007 blast resistant glass. When it comes to protecting people, places or product there is one clear choice – ESG Secure™, the UK’s preferred security glass.


ESG Secure™356: Manual attack Resistant

Tested to ensure it withstands the type of high impact strikes that may occur as someone tries to smash to glass, EN356 uses two different types of test criteria depending on the level of protection the glass is tested to. P1A offers the lowest level of protection while P8B gives the highest. P1A – P4A are tested using the hard impact test which involves dropping 3 metal balls onto the glass in a group formation from increasing heights of 1.5m to 9m. P5A uses the same test but the balls are dropped three times from 9m instead of once.

The test for P6B-P8B involves simulating a much more violent attack on the glass and involves firstly hitting the glass with a hammer a minimum of 12 times to break the glass, then hitting the glass continually in an area 400mm x 400mm with an axe. The higher the number of times the glass is hit before the axe breaks through glass determines the rating of the glass. P6B survives up to 50 strikes through to P8B withstanding over 70.


ESG Secure™1270: Intruder resistant

Many see the testing that is required to achieve LPS1270 certification as a more ‘real life’ set of tests. Created by the Loss Prevention Certification Board it is endorsed by police and insurers alike who were consulted during its creation. The rating of the glass is indicated by three numbers eg 1/4/3. Each number depicts the glasses minimum resistance to the creation of a different size hole. The first number indicates how long and with what tools it takes to create a hole in the glass big enough to put a piece of wire or other such tool that can be used to open a handle or lock. The second number is how long and with what tools it takes to create a hole big enough to get an arm through the window and finally the third is for hole big enough to fit a human torso through. The complete chart showing the exact tool categories can be found below.


ESG Secure™1063: Ballistic Resistant

1063 is the glass that people put their trust into to save lives, it is the ballistic standard that defines bullet resistant glass. Through its multiple layers of glass and interlayers it slows down and stops the  bullet from passing through the glass while absorbing its energy across the entire panel. As with the other types of security glass there are varying levels of protection offered by bullet resistant glass, ranging from BR1-BR7 and then SG1 and SG2. Each level of protection is determined by firing into the glass within a triangular shape within 4-5". As the level of protection increases so does the size of gun and calibre of bullet used.  BR1 is tested against a rifle shooting a 0.22 bullet, while BR7 is tested with an assault rifle firing 7.62 calibre rounds. SG1 and SG2 are specially tested against shotguns. Our ballistic range also gives a spall and no spall tested result. When the glass is struck by the bullet the whole panel flexes and the energy from the bullet can push small splinters of glass in the direction the bullet was travelling. Spall means the glass was tested allowing these small pieces of glass to break away from the panel, while no spall means the glass stays completely intact with no splinters, with the help of a polycarbonate outer layer.


We also manufacture ESG Secure to ISO 19633:2007 blast resistant standards and we have the ability to combine all of our security glass products with our fire resistant and switchable glass products. 


We are committed to giving customer satisfaction through service provision of the highest standard. This applies to all areas of our business and is central to our mission.

Our products are tested in house and by Europe’s leading Independent, third-party certifiers and testers such as BRE, TNO, Technalia, Efectis, Wiltshire Ballistics and the British Standards Institute which distinguish our products and services from our competitors, and gives you, our customers, confidence about their performance.



BS EN 1063:2000 Security Glazing – Testing and classification of resistance against bullet attack


BS EN ISO 9001 : 2008 – FM 511206
Audit Body – BSI (British Standards Institute)

Originally Registered – 8th January 2007


BSI Kite Mark Licence – KM 511207
Class 1 Toughened Glass - BS EN 12150 : 2000

(Glass in building. Thermally toughened soda lime silicate safety glass)

Impact Tested – BS EN 12600 : 2002
(Glass in building. Pendulum test. Impact test method and classification for flat glass)


BSI Kite Mark Licence – KM 511207
Heat Strengthened Glass - BS EN 1863 : 2000

(Glass in building. Heat strengthened soda lime silicate glass).

Bending Strength Tested – BS EN 1288-3 : 2000
(Glass in building. Determination of the bending strength og glass – Part 3 – Test with specimens supported at two points – Four pointbending).


BSI Kite Mark Licence – KM 511207

Heatsoaked Glass – BS EN 14179 : 2005
(Glass in building. Heat-soaked thermally toughened soda lime silicate safety glass)


BSI Kite Mark Licence – KM 511207

Laminated / Toughened Laminated Glass – BS EN 14449 : 2005 (Glass in building. Laminated glass and laminated safety glass)

Tested in accordance to – BS EN 12543-4 : 1998
(Glass in building. Laminated glass and laminated safety glass. Test methods for durability)


BSI Kite Mark Licence – KM 511207 (For Impact – BS EN 12600:Class1, and Toughened glass - BS EN 12150 only. 
Plus Fragmentation tested under BS EN 12150 by BSI)

Approved & Certified by CERTIFIRE for ESG Pyrotech E30 in timber and steel doors and screens, and ESG Pyrotech E30 and E60 within steel doors and screens – Certification Number: CF 628


BS EN 356 : 2000
(Glass in Building – Security glazing. Testing and classification of resistance against manual attack).

LPS 1270 Issue 1

(Requirements and testing procedures for the LPCB approval and listing of intruder resistant security glazing units).